The deep clean

In the event that the surface you're using Vinyl Care on needs some stronger cleaning power, or the product smears or "fish eyes", you can use our citrus based all purpose cleaner Orange Agent, to deep clean the surfaces prior to application, to help remove heavy dirt and grime, or other silicon based products.

Step 1

For this cleaning method, you can use a brush to agitate the surface if the dirt and contamination is really heavy. We recommend using a super soft Horse hair brush like our Plush Brush. If you aren't using a brush at this stage, we recommend to use a microfibre applicator like our Square Bear. Work in small sections at a time, using small, side to side motions, making sure to cover the entire area thoroughly.

Step 2

Now this is the important bit; wipe off the Orange Agent with a folded, clean, low pile microfibre cloth like our Plush Daddy or Dirty Deeds while it's still wet. You remove it wet, so the embedded grime you've cleaned off is wiped into the cloth with the cleaning solution, as if you let it dry, it will bond back onto the surface you're trying to clean. Be sure to inspect the cloth after each use and fold to a fresh, clean side when you begin seeing any dirt and grime building up in it. 

If you notice the microfibre applicator getting slightly dirty, (especially when cleaning more grime affected surfaces) you can hand wash it out in fresh water, then wring it out till it's dry/damp, apply Orange Agent and carry on cleaning. 

Continue doing this system of cleaning, till all surfaces are clean. Follow up with Vinyl Care.

This product leaves a very stark finish, so use Vinyl Care on the area straight afterwards to get the surface looking and feeling back to how it should.