Prewash with Creaming Snowda

A super thick and creamy pre wash foam concentrate, Creaming Snowda needs to be used with a pressure washer and a suitable foam cannon like our Snow Blow Cannon, or a pressurised foamer like The Frother.

Dilute the Creaming Snowda at a 1:9 ratio (100mL to 900mL of water). Fill the cannon bottle with water first, then add the Creaming Snowda and connect the cannon to the bottle and the pressure washer. Adjust the cannons air mixture so you get a lovely thick foam. Apply foam to the dirtier lower back areas first, making your way up to the roof.

After the car is covered, leave to dwell for 4-5 minutes, but don't allow it to dry. Rinse with a strong jet of water from the pressure washer, working from the roof down in methodical overlapping motions.