Step 5 - Continuing till completed
Apply a couple more drops of Mr Black to the application foam and continue to the next section of trim. Always have an overlapping wet edge on larger trims, to ensure an even finish. Do not let it dry and come back later to it, as it can be difficult to match up the two areas.
Repeat the above steps till the job is all complete.
If the plastic is in poor condition it can be good to give it a second coat. Allow a 1 hour cure time before applying the next coat. As the surface is already sealed from the first coat, you will notice it uses a lot less product and is quicker to apply the second time around.
Do not get it wet for 12 hours while it cures.
Wash any Mr Black from your skin with soap and water after use.