Washing
Get your Wash and Rinse buckets ready and 3/4 fill them with clean water. Add 1 capful of Nanolicious Wash to your Wash bucket, then froth it up with the pressure washer to get a good head of suds. Thoroughly rinse out your Shagtastic Wash Pad in the Rinse bucket, then dip it into the Wash bucket and let it absorb a large amount of suds.
Starting at the top of the car, wash in straight lines, flipping the wash tool as needed, going back to the Rinse bucket after each small section to rinse any dirt from the wash tool. Then go back into your clean Wash water and do the next section until the whole car is done. Do the lower sections of the doors last, and any other sections that are quite dirty.
If you're washing in the sun, we'd recommend washing small sections of the car at a time (1 door for example), then rinse that panel off before moving onto the next panel, so that the Nanolicious Wash doesn't dry on the paint. Once you've washed the whole car, take the end off the hose to flood the water off the panels, making it easier and quicker to dry the car.
Once you're done, empty the buckets and give them a good rinse out. You don't want to be storing any wash water for use later!
To see a detailed explanation on this safe wash method, see our guide here: