Adding Protection

Wet Dreams can be used to top up and maintain protection of our other sealants like Bead Machine, or can be used as a stand-alone sealant with 2-3 months of protection on good condition paint. It works best when used in the shade on cool panels, and the panels need to be wet.

After washing the car, rinse it down thoroughly from the top down. Grab your Wet Dreams, working in small sections (e.g., one quarter of a bonnet, one door), mist Wet Dreams over the section and then immediately rinse off with your pressure washer or the Jet setting on the hose - Wet Dreams bonds almost immediately, so you should see instant bead porn. Continue around the car using this same technique until it's done, making sure to keep the rest of the panels wet to avoid water spotting.

Once complete, take the end off your hose and flood the panels with water - the newfound surface tension will force the water to clump together and sheet away in one go which means less drying time for you!

For a detailed guide on getting the most from Wet Dreams, see our detailed guide below: