Probably the most important and overlooked part of detailing is keeping your cloths clean. We made our own microfibre wash to break down detailing chemicals from the fibres of the cloth and allow the fibres to rinse free, meaning your cloths will continue to work like new for years to come. For the Circle Work pad that you used with the Paint Cleanse & Restore, put a few MLS of the Microfibre Wash directly onto the pad and massage it around with your fingers to help release the product, then give it a good rinse under some warm water before putting it into the wash. This same method applies for any heavier stained cloths or applicators. You can also put approximately 10-20ml of Microfibre Wash into a bucket with some warm water and let the applicators and cloths soak in there for 30 minutes prior to putting them through the wash.
Put all your cloths and pre soaked dirtier applicators into the washing machine on a normal cycle, on the warm water setting. Put 20ml of Microfibre Wash in the machine (DO NOT USE FABRIC SOFTENERS) and away you go. Once they’re washed, tumble dry the cloths on the cool setting and then store them in an air tight container if possible, ready for their next use.