Glass, Tyres & Wheels

We like to do these last. Interior and exterior glass can be cleaned in the same way. 

Naked Glass and an Inta-Mitt in hand, follow these simple steps for a perfect finish on your glass.

Lightly mist a couple sprays only of Naked Glass into the green side of the Inta-Mitt cloth and apply to the glass. DO NOT drench the cloth - a spray or two is always enough. Go back and forth, then up and down, ensuring good coverage.

Flip and turn to the purple side and buff off any residue for a perfect finish. If your cloth is wet from product, or you begin to notice slight streaking, you can turn the Inta-Mitt inside out and keep cleaning. It's imperative that the cloth is dry to achieve that perfect, streak free finish.

We say to spray into the Inta-Mitt and then apply so you don't get over spray everywhere, saving you time in cleaning up later. Only if the glass is really, really dirty is it a good idea to spray a little bit extra directly onto the glass.

Wheels and Tyres are lucky last. Dry the tyres first with a clean and dry Dirty Deeds cloth or a grey Twisted Little Sucker. Then, spray a few sprays of Sweet Rubber or Tyre Sheen into your All Sorts applicator then wipe over the tyre, covering all the rubber surface, getting it into the lettering on the tyres. If you like a shinier look on your tyres, you can apply a second coat after the first coat has dried.

To add some protection to your wheels, you can spray Wet Dreams on and rinse it off while the wheels are still wet like we did earlier in the wheel cleaning section, or you can apply some Bead Machine when the wheels are dry now with a Dirty Deeds cloth. This will help protect the wheels, and help brake dust come off easier next time you clean them.

TIP: If you're working in the sun, you would dry your wheels earlier in the process to avoid water spots.