Step 1

Easy application

With your Naked Glass and Inta-Mitt ready, here's how we like to get the best results.

First, make sure your hands are clean and dry before putting your hand inside the Inta-Mitt. This helps prevent skin oils and dirt from transferring into the cloth and potentially causing streaks.

Lightly mist 1 to 2 sprays of Naked Glass directly onto the green twist pile side of the Inta-Mitt. You don't need much product, and spraying into the cloth rather than directly onto the glass helps avoid overspray onto surrounding trims and surfaces.

Working on one window or half a windscreen at a time, wipe the glass in an up and down, then side to side motion to thoroughly clean the surface. Keep the purple textured side of the Inta-Mitt dry, as we'll use this for the final wipe in the next step.

TIP: Take care around wiper arms, sharp edges and other protruding parts, as these can catch and pull the threads of the green twist pile side of the Inta-Mitt.

If the glass is particularly dirty, you can use a little extra Naked Glass directly on the surface to help break down the contamination.