How to use your Creamin' N Gleamin' Pack 2025

What is it?

The Creamin' N Gleamin' Pack is a great system of custom car care products, inside you'll find:

500mL Creaming Snowda
500mL Nanolicious Wash
390mL Wet Dreams
390mL Naked Glass
2 x 600mL Wimmers Creaming Soda
 

Prewash with Creaming Snowda

A super thick and creamy pre wash foam concentrate, Creaming Snowda needs to be used with a pressure washer and a suitable foam cannon like our Snow Blow Cannon, or a pressurised foamer like The Frother.

Dilute the Creaming Snowda at a 1:9 ratio (100mL to 900mL of water). Fill the cannon bottle with water first, then add the Creaming Snowda and connect the cannon to the bottle and the pressure washer. Adjust the cannons air mixture so you get a lovely thick foam. Apply foam to the dirtier lower back areas first, making your way up to the roof.

After the car is covered, leave to dwell for 4-5 minutes, but don't allow it to dry. Rinse with a strong jet of water from the pressure washer, working from the roof down in methodical overlapping motions.

Hand wash with new Nanolicious

Grab a Wash bucket (available separately), and fill it 3/4 full of water. We'd also recommend grabbing a Rinse bucket available separately if you wish, and put a Great Barrier Thingy into the bottom. We strongly recommend 2 buckets - one for clean rinse water, and one for your wash water. The idea here is to dip your favourite Bowden's Own Wash Tool into the wash water, wash a section of the car, then bring your tool back to the clean rinse water and wring it out in there, before going back into the wash water and washing the next section, to stop dirt and contamination going into your wash water as much as possible.

Use 3 of the pop top capfuls or 30mL of Nanolicious Wash and pour it into the bucket, giving the cap a good thrash around in the bucket. Agitate the bucket with your pressure washer or the Jet setting on your hose to mix the wash and produce a nice head of suds.

Dip your wash tool into the wash suds and let the suds soak into it for a couple seconds (squeezing it gently can help it absorb the wash suds), then starting at the roof of the car, gently wash in a back and forth motion, then side to side so that you don't miss any spots. We prefer not to go in circles when washing - not because it will create swirl marks, but because when you do small circles, there's always a bit that you miss. When you wash up and down, then back and forth, you are guaranteeing that you don't miss any spots.

After washing the first section, dip your wash tool into the clean rinse water and thrash it about and/or squeeze the suds out so that any dirt or grime leaves the wash tool, then dunk it back into the wash suds and do the next section of the vehicle, leaving the lower dirtier sections till last. Once you've washed the whole car, rinse the suds off thoroughly (NOTE: if you're washing in the sun, rinse the suds off periodically - don't let them dry on the paint). 

Protection with Ceramic Wet Dreams

Wet Dreams can be used to top up and maintain protection of our other sealants like Bead Machine, or it can be used as a stand alone sealant with 2-3 months of protection on good condition paint. It works best when used in the shade on cool panels, and the panel needs to be wet. This new ceramic formula of Wet Dreams is even more hydrophobic, with longer lasting protection and slickness.

After washing the car, rinse it down thoroughly from the top down. Grab your Wet Dreams and working on one section or panel of the car at a time, evenly mist the product over the section ensuring full coverage. IMMEDIATELY rinse off with your pressure washer or the Jet setting on the hose - Wet Dreams bonds almost immediately, so you should see instant bead porn. Continue around the car using this same technique until it's done, making sure to keep the rest of the panels wet to avoid water spotting. Keep in mind that with this faster cure time, it can potentially dry faster, so be sure to follow the instructions to avoid getting streaking!

Once complete, take the end off your hose and flood the panels with water - the new found surface tension will force the water to clump together and sheet away in one go which means less drying time for you!

For a detailed guide on getting the most from Wet Dreams, see our detailed guide below:

Drying Time

Available separately are our super plush drying towels the Twisted Pro Sucker and The Big Green Sucker. Add a few sprays of our quick detail spray Boss Gloss into each side of either cloth to enhance your drying experience.

We also recommend drying the wheels and tyres before adding any tyre shine - give them a quick wipe over with a dedicated microfibre cloth like our Twisted Little Suckers to remove excess water.

See our detailed guide below on our drying towels and how to effectively use them.

Crystal clear glass with Naked Glass

The last step of any good detail; the glass. Spray a couple sprays of Naked Glass into the green side of an Inta-Mitt (sold seperately), and then wipe over the glass in a north-south, then east-west direction ensuring full coverage of the glass. Then, flip the Inta-Mitt to the purple side and buff off any residue for a perfectly clean, bare and streak free finish.

Post detailing treat

Most importantly, crack open an ice cold Wimmers Creaming Soda as your post detail treat (you've earned it) and admire the majestic shine that your two or four wheeled friend now has. If you need more time alone with your vehicle, crack a second one once the first is consumed. 

Any questions?

The Creamin' N Gleamin' pack for 2025 is available exclusively through your local Repco store in strictly limited numbers. To find your closest store, click this link - Store Finder.

Thank you for your continued support and allowing us to keep making great car care products!

If you have any questions, please send us an email - info@bowdensown.com.au or Free call 1800 351 308.

Happy detailing,

Brett Hobbs