Caring for uncoated/Aniline Leather

If you've done the water drop test and discovered your vehicle has uncoated or aniline leather, then the advice in the previous section no longer applies. Unlike modern PU coated leather, these beautiful old hides are exposed directly to the environment and rely on regular conditioning to replace the natural oils and waxes they gradually lose over time.

That's exactly why we developed Leather Balm. Hand crafted in small batches and developed over many years of testing on our own collection of classic cars, Leather Balm is specifically formulated for older, uncoated automotive leather. Rich in nourishing oils and soft waxes, it penetrates deep into the leather to restore softness, suppleness and that beautiful natural matte appearance without leaving an artificial shine or greasy finish. It also helps preserve the leather for years to come while enhancing the unique grain, character and rich aroma that only genuine aniline leather can offer.

Leather Balm is intended only for uncoated or aniline leather and should not be used on the polyurethane coated leather found in the vast majority of modern vehicles.

How to use Leather Balm

Before applying Leather Balm, ensure the leather is clean and completely dry. Using a clean and dry Square Bear or Circle Work pad, apply a small amount of the balm onto the applicator and gently apply in small overlapping motions, one section at a time, ensuring full coverage.

Allow the balm to soak into the leather for around 10 to 15 minutes before buffing away any excess with a Plush Daddy cloth. Older, very dry leather may benefit from a second light application after several hours or the following day, rather than applying one heavy coat.

Leather Balm is designed to soak into the leather rather than sit on the surface, so a little goes a long way. Regular applications every six to twelve months will help keep older aniline leather soft, supple and beautifully preserved.