Flat Matte application

Work on small sections at a time, in the shade on surfaces that are cool to the touch. Break the car up into small sections (1/4 - 1/2 of a bonnet for example). Grab 2 fresh, dry and clean Big Softie cloths folded to the low pile side. One of these cloths will be your application cloth, and the other will be your cloth for the final buff.

Step 1 -

Shake the bottle well and mist 4-6 sprays of Flat Matte into the low pile side of a folded, clean & dry Big Softie microfibre cloth. Wipe the product evenly over the surface in an overlapping up and down, then side to side motion.

Step 2 -

Immediately use the second clean and dry Big Softie cloth and buff off any residue. Fold and turn the cloth often for a nice, even finish.

Step 3 -

Mist 1-2 more sprays only into the application Big Softie cloth for each subsequent section, and continue the above process till the whole car is completed.

Allow at least 4 hours to cure before it gets wet for best results.

Once you've finished the whole car, put both of your cloths into a bucket like our Microfibre bucket, half filled with water and throw 10mL of Microfibre Wash in there and thrash it around to release the super hydrophobic polymer from the fibres of the cloth. Keep them wet and then put them in the machine wash together with the other microfibre cloths you've used in the process.