Quick Cone Instructions

The cone design is ideal for both broader and tight areas, as well as curved sections like deep dish wheels, wider spoke wheels and alloy bars. It's made of a quality German foam, with a firm tip and cut tabs at the base for more uniform polishing on curves.

Same rules apply here, so don't use on chromed or clear coated surfaces, unless using with Shiny Stuff. Test for clear coat by putting a small dollop of Metal Polish on a cloth and gently rub into a small, inconspicuous section in a side to side motion. If black residue comes off onto the cloth, it's not clear coated and you can use the Quick Cone and a metal polish.

Use with the liquid Metal Polish for stainless steel, chequer plate and harder polishable metals. Use our Shiny Stuff fine paste for soft alloys, billet and aluminium.