Repco - Red Passion Bucket

Wheely Clean

Half fill your Wheels bucket with water (Wheels bucket is available separately), then add a capful of Red Stuff and froth the mixture up inside the bucket with a short blast from the pressure washer to properly mix it up. If you don't have a pressure washer, use the "Jet" setting on your hose end.

With your Wheels bucket set up next to the wheel, and with your brushes handy in the bucket, spray the Wheely Clean directly onto the wheel. Leave it to dwell for only a short time (30 seconds or so), then scrub the wheel with the Little Chubby brush. If you'd like to clean the inside barrel of the wheel, use the Flat Head brush, and get in there around the inside of the wheel barrel. Rinse the brushes out in the Wheels bucket as needed.

For the smaller or intricate areas around the wheels (wheel nuts etc), use the Nuts and Guts brush from the Foursome brush set, which is available separately.

Once the wheels and tyres have been cleaned, you can spray a few sprays of Green Dreams straight onto the wheel face, then pressure wash or hose it off, to add some super easy protection and a lovely shine in one step. This will make it more difficult for brake dust to stick to the surface, making your next wash just that little bit easier.

For a detailed guide on wheel cleaning, see our guide below:

Applying Tyre Sheen

Now it's time to get the tyres looking nice. Nothing too shiny or over the top, just a lovely mid sheen like our Tyre Sheen gives.

The All Sorts applicator is great for applying our Tyre Sheen, and can be purchased separately. With the tyres now dry and preferably out of direct sun, spray a few sprays of Tyre Sheen straight into the All Sorts applicator, then apply to the rubber and wipe it over the tyre face until a nice and uniform finish is achieved. For a shinier finish, you can apply a second coat of Tyre Sheen after allowing the first coat a few minutes to bond.

No need to wash the All Sorts applicator out, simply store it in a plastic bag of some sort until the next time you wish to use it.

Interior Detailing with Far Cough

Our Far Cough antibacterial spray is ideal to use on all interior and exterior surfaces for the home or car as it will inhibit further bacteria growth on any hard, non-porous surfaces.

Grab the Far Cough and spray a few sprays into a clean and dry Dirty Deeds cloth, then wipe over all of the surfaces in your car you want to protect. No need to over saturate, just a nice, even coat. Allow this to sit on the surfaces for 10 minutes while it works away, then come back and wipe over all of the surfaces once more with the damp cloth, then finish up with a final wipe with a clean and dry Dirty Deeds cloth.