Time to wash

The Wash & Rinse buckets and Great Barrier Thingy is a match made in heaven. Place your Great Barrier Thingy into the bottom of your Wash & Rinse buckets before you start washing your car to make sure you’re going to be trapping as much dirt as possible in the bottom of your buckets. We would strongly recommend purchasing our Wheels bucket to go with this kit, to use as a dedicated wheels only bucket.

Always do any car washing in the shade, with the paint cool to the touch for best results. Not doing this can cause the water and the wash suds to evaporate faster than you'd like, possibly leading to water spots on the glass and paint!

With your Great Barrier Thingy's in the Wash & Rinse buckets, fill the Rinse bucket with approximately 10-12L of water. Add 1 capful of Nanolicious Wash to the Wash bucket and then froth it up nicely with either the jet function of your hose, or preferably with a pressure washer.

Start by pressure washing the car down, or giving it a good blast with the jet function on your hose. We do this to remove any heavier bits of dirt and other contamination. Put your Shagtastic Wash Pad into your suds solution, giving It a gentle squeeze while it’s in there to really suck up all the suds it can. Then, starting from the top of the car first, gently wash the whole car, being sure to wipe the Shagtastic Wash Pad over the Great Barrier Thingy when it goes back into your Rinse bucket, to ensure any dirt and grime picked up from the car goes to the bottom of the bucket and is trapped by The Great Barrier Thingy.

Once washed, rinse the whole car off with a nice gentle stream of water from the hose. At this point we want to flood the panels with water to help remove as much water from the surface as possible, so there’s less to dry.