Time to wash

The Wash & Rinse buckets and Great Barrier Thingy is a match made in heaven. Place your Great Barrier Thingy into the bottom of your Wash & Rinse buckets before you start washing your car to make sure you’re going to be trapping as much dirt as possible in the bottom of your buckets. Also included is the Wheels bucket to go with this kit, keeping the dirty job of cleaning the wheels well away from your Wash and Rinse buckets.

Bug Removal

There are a few different and effective ways to use our Bugger Off, but we find the easiest way is to spray Bugger Off on the affected areas at the front of the car before you do any other steps, leave it to dwell for around 1 minute, then pressure wash it off, or cover it with Snow Job at this stage as part of your pre wash system. To make the job even easier, use our DeBugger cloth to help loosen the bugs from the surface.

 

Washing

Always do any car washing in the shade, with the paint cool to the touch for best results. Not doing this can cause the water and the wash suds to evaporate faster than you'd like, possibly leading to water spots on the glass and paint!

We like to start by cleaning our wheels first, as they are generally the dirtiest part of the car, and the grime off them is not what you want going onto your freshly washed car. Also, it's more time efficient to wash afterwards, so you don’t have the rinse water sitting on your cars panels for a longer period after washing. 

We've always liked using pressure washers to help detail our cars, and they help a lot with wheel cleaning. If you don’t have a pressure washer, and you’re using a hose, or your wheels needed some extra cleaning after the pressure washer, we recommend our dedicated Wheels bucket (place a Great Barrier Thingy in it if you like) Add half a capful of Nanolicious Wash and then fill it to the desired level and suds it up using the hose or pressure washer. Get the bucket situated next to the first wheel you are going to clean.

Grab the bottle of Wheely Clean and spray 6-8 sprays all around the surface of the wheel. Using your desired Wheel Woolie or wheel brush, dip it into the Wheels bucket mixture and wash the wheel face and dish thoroughly. Rinse the dirty brushes out to clean off the grime and dirt and then go back to the Wheels bucket and continue cleaning. This will keep your wash water clean and effective. Once you're happy the wheel is clean, rinse it clean with your pressure washer or hose and move onto the next wheel. Continue this procedure on each wheel till the job is done.

With your Great Barrier Thingy in the Wash & Rinse buckets, fill the Rinse bucket with approximately 10-12L of water. Add 1 capful of Nanolicious Wash to the Wash bucket and then froth it up nicely with either the jet function of your hose, or preferably with a pressure washer.

Start by pressure washing the car down, or giving it a good blast with the jet function on your hose. We do this to remove any heavier bits of dirt and other contamination. Put your Shagtastic Wash Pad into your suds solution, giving It a gentle squeeze while it’s in there to really suck up all the suds it can. Then, starting from the top of the car first, gently wash the whole car, being sure to wipe the Shagtastic Wash Pad over the Great Barrier Thingy when it goes back into your Rinse bucket, to ensure any dirt and grime picked up from the car goes to the bottom of the bucket and is trapped by The Great Barrier Thingy.

Once washed, rinse the whole car off with a nice gentle stream of water from the hose. At this point we want to flood the panels with water to help remove as much water from the surface as possible, so there’s less to dry.