Instructions for use - Floor mats and carpets

 

Step 1:

Make sure the surface is totally dry and give the carpets and mats a good vacuum to remove any and all debris from them. The fabric needs to be as clean as possible before you apply Fabratection.

 

Step 2:

If the seat carpets or mats have stains on them already, use our Fabra Cadabra fabric cleaner as per its directions to remove those stains first. Any heavier staining or marks may need the addition of Orange Agent and a shampoo extraction machine. See our guides here -

 

 

 

 

 

 

 

 

 

 

 

Step 3:

IT'S CRITICAL THE SURFACE IS 100% DRY BEFORE APPLYING Fabratection.

Wearing gloves for this job isn't a bad idea as the product can get sticky on your hands.

• Working in the shade, in a well ventilated area in temperatures between 10c and 35c is ideal, give the bottle a good shake. 
• Spray Fabratection into a Square Bear applicator until it's quite damp, then rub it into the carpets and mats one section at a time (30cm x 30cm or so), from all angles, working it into corners, joins and seams, to ensure the best coverage. 
• Spray more Fabratection into the Square Bear, then do the next section, and so on until all the carpets and mats are done.
• Allow this coat to cure for 20 minutes, then apply a second coat in the exact same manner.
• Allow another 20 minutes, then apply a third coat using the same technique.

Any overspray of Fabratection, simply wipe it off with a damp cloth before it can dry.

Allow the Fabratection a longer cure time, from 48 hours to even longer for deeper pile carpets, before getting wet.