Adding protection with the NEW Wet Dreams

Wet Dreams can be used to top up and maintain protection of our other sealants like Bead Machine, or it can be used as a stand alone sealant with 2-3 months of protection on good condition paint. It works best when used in the shade on cool panels, and the panel needs to be wet. This new ceramic formula of Wet Dreams is even more hydrophobic, with longer lasting protection and slickness.

After washing the car, rinse it down thoroughly from the top down. Grab your Wet Dreams and working on one section or panel of the car at a time, evenly mist the product over the section ensuring full coverage. IMMEDIATELY rinse off with your pressure washer or the Jet setting on the hose - Wet Dreams bonds almost immediately, so you should see instant bead porn. Continue around the car using this same technique until it's done, making sure to keep the rest of the panels wet to avoid water spotting. Keep in mind that with this faster cure time, it can potentially dry faster, so be sure to follow the instructions to avoid getting streaking!

Once complete, take the end off your hose and flood the panels with water - the new found surface tension will force the water to clump together and sheet away in one go which means less drying time for you!

For a detailed guide on getting the most from Wet Dreams, see our detailed guide below: