Beaut Beads - a modern, super hydrophobic paste wax

Beaut Beads is a totally Aussie made paste wax, combining T1 grade Carnauba Wax with other high quality waxes, and some pretty amazing synthetic ingredients. This combination of ingredients has allowed us to make something that not only gives that deep warmth and shine that a natural wax gives, but we were also able to incorporate some epic protection from the more durable synthetic ingredients. To read more in-depth about Beaut Beads, its creation journey and more, see here.

Using it couldn't be easier. Grab your included applicator and "dab" the foam into the jar, working your way around the applicator until you get a decent amount on there. Apply a very THIN coat to the surface of the paint, one section at a time. Apply it in a north-south, then east-west overlapping motion so you don't miss any spots. You can also apply it in small circles if you wish. A little goes a long way here, so just dab the applicator back into the jar as needed. Go around the entire car using this method and then allow the wax to cure on the surface for 20-30 minutes. (NOTE: avoid getting the wax on black plastics or rubbers. If you do, wipe it off straight away with a cloth and some Flash Prep. Tape off plastics and rubbers if you wish).

After the wax has had 20-30 minutes to bond, wipe off the excess with a super soft Drop Bear cloth, flipping and turning the cloth often. Sit back and marvel at the amazing shine and glow your paint now has - dark or light coloured cars, Beaut Beads will bring out the best in the paint.

A lot of paste waxes can be a right pain to remove. We spent a lot of time during the development of Beaut Beads to formulate it to be super easy to remove, so when doing this part, you will really appreciate this aspect of the product.

Once all of the wax has been removed, leave it to cure for a minimum of 4 hours before getting it wet or leave it overnight for best results.