What is it and how does it work?
The Frother is a quality built, portable hand pressurised foamer that you can use for foaming without a pressure washer, when you're doing smaller detailing jobs or if you're away from home.
You can use it all around your vehicle with a variety of our water based car care products including Snow Job, Orange Agent, Wheely Clean, Sublime Clean and Fabra Cadabra.
It can be used on cars, bikes, 4x4s, vans, and much more. With our Snow Job foam as an example, fill the bottle with around 1.3 litres of water, then add approximately 150ml of Snow Job concentrate to fill it to 1.5 litres - be sure this ratio is 9:1 (9 parts water to 1 part snow foam concentrate).
Before using The Frother with any of our snow foams, be sure to take out 2 of the foaming pucks, and replace them with the middle sized spacer for optimum foam. For all other products, take the spacer out and put all 4 pucks back in.
Shake it well, and then pressurise the sprayer with around 20-30 pumps and foam away! There will be enough pressure to foam a regular door panel, a front or rear guard, the boot, or a larger wheel before repumping.
Use The Frother for a variety of jobs, including:
- Snow foaming - Pre-wash with our Snow Job or Mega Snow Job foams on the lower, dirtier areas when you're on a road trip and don't have a pressure washer handy.
- Wheels, tyres and inner guards - Foam on our Wheely Clean or Orange Agent for easy and convenient cleaning.
- Engine Bays - Use with Orange Agent to apply a nice foam layer, allowing a longer dwell time on grease and grime.
- Carpet and rubber mats - Apply our Fabra Cadabra or Sublime Clean, before a quick scrub and a wet and dry vacuum.
