Application method 1:

This is for the first time application of the product to any car or bike or if you don’t use a pressure washer:

1. Work on one wet panel area at a time, evenly mist Wet Dreams in a sweeping motion over the entire surface.

2. Wet and then wring out a Big Softie microfibre cloth, then wipe over in a back and forth methodical action to get an even coverage. (Continue to wring this cloth out between different panels/sections as well)

3. IMMEDIATELY rinse off thoroughly with a strong jet of water in a methodical side to side motion. Being sure to rinse any glass and adjoining panels that might have gotten overspray on them as well.

The bead porn effect is activated by friction from the strong jet of water over the surface. You'll notice the beading will get better over the next 10 to 15 minutes as the product cures on the surface. If you wish for more water beading after the first application, re-apply to the areas that need it for complete satisfaction. 

Once done, rinse out the Big Softie cloth and then put it into a bucket of clean water. Machine wash it in our Microfibre Wash with the Big Green Sucker and other cloths once you're all packed up and finished. You don't want this towel to dry with product in it, otherwise it will become super hydrophobic as well.  

Now read on to the drying section below.