Application method 2:
This method is best if you're using a pressure washer and also great for touch-less use or quick top ups:
1. Work on one wet panel at a time, mist the Wet Dreams in a sweeping, even motion across the entire surface.
2. IMMEDIATELY rinse thoroughly with a pressure washer. Being sure to rinse any glass and adjoining panels that might have gotten overspray on them.
3. Work right around the car till you're finished. The bead porn effect is activated by the friction from the strong jet of water over the surface. You'll notice the beading will get better over the next 10 to 15 minutes as the product cures on the surface. If you wish for more water beading after the first application, re-apply to the areas that need it for complete satisfaction.
With this method you will use more product over the spray and wipe/spread method mentioned above. But it can be handy if you're using the Happy Ending finishing foam, as this way is faster and easier to quickly boost smaller sections between its applications. Just spray it on the areas the beading is reduced and then pressure wash it off.
On the slight chance that you get any streaking or uneven patchiness when using this method, simply wipe over the marks with the Big Green Sucker using a little bit of extra pressure on the towel to remove these "high spots". If the marks are left to dry, don't freak as the Paint Cleanse and Restore can remove them easily.
Now you're all done, it's time to move onto the drying stage below.