More little tips and bits

  • Although the protection can last up to two months, we personally like to use Wet Dreams monthly on daily driven cars, to keep the water beading and shine at a great level. 
  • For weekly washing you can use the Auto Body Gel, Wax Wash or Nanolicious Wash car shampoos on the coated surface. Be aware that all these washes will create an initial hydrophilic (non beading) finish, but the hydrophobic (beading) finish will return in a short period of time after rinsing them off. 
  • In case you missed it above, we found that drying with both Boss Gloss in the Big Green Sucker and After Glow used in a damp Big Softie does not affect the super hydrophobic surface. Both become even more amazing to use after Wet Dreams, as they glide effortlessly over the treated surface. 
  • We have found that using hard or poor quality water will affect the beading nature of Wet Dreams, so dam, bore or harder town water is not suitable to make it work its best.  
  • As both Wet Dreams and Happy Ending are currently our most protective products, there is no added benefit to using Fully Slick, Lazy Wax or Carnauba Body Wax. After Glow can still be used as a drying aid on top of them.
  • You can use Wet Dreams on top of the Happy Ending finishing foam and vice versa as their formulas are very compatible. But, there is no need to layer them up right after application. One coat is generally enough - you can do two coats if you feel it needs a little extra beading.  
  • You can use Wet Dreams over/on top of any of our previously applied current waxes and sealants.
  • Wet Dreams works on Paint Protection Film (PPF) which is on both the Ford GT and Ferrari 812 Superfast nose/ bonnet panels in our video's on YouTube and it's also great for vinyl wrapped vehicles. Due to the different nature of these surfaces, we find it needs two initial coats to get a good beading effect on the surface.
  • We do not recommend this for matte finished paint or matte wraps, due to the way it boosts gloss. If you do get it on them, just clean off with our Clean Detail spray to restore the matte finish. 
  • For bikes, Wet Dreams is awesome! We find it's a better option than the Happy Ending finishing foam as you can better control where the product is going, ideal for the more intricate areas you find on bikes.
  • If the product dries on the car, or you accidentally miss a section when washing off and find streak marks, don't freak. The marks can be quickly removed if fresh, by rubbing over them with the Big Green Sucker (use Boss Gloss with it for lubrication) and a little bit of pressure. If you notice the marks days later or they won't come off with the towel, the Paint Cleanse & Restore will clean them off easily.
  • The products colour can be slightly affected by light over time, so store the bottle accordingly in a cooler part of your home. Any colour change does not affect the way the product will work in any way. 
  • Any slight opaque changes or small clear objects you may see develop in the bottle are normal. What you're seeing is the concentrate of the Aussie made polymer. The important things to know is that it won't affect the way this product works or block the spray trigger.
  • If you like to use a pressure washer, also have a look at our Happy Ending finishing foam - which is applied via our Snow Blow Cannon in much the way the Snow Job pre-wash foam is. It's one of the easiest ways to use these super hydrophobic type of products. 
  • For a windscreen washer additive, we'd strongly recommend to use our Wipe Out windscreen washer additive. Mainly as it won't remove or affect the protection of Wet Dreams.