Protect and rejuvenate

Get the Vinyl Care and mist about 4 sprays into a fresh and clean Square Bear applicator. You use an applicator to ensure good coverage, as well as for making a lot less work wiping away over-spray if you spray it directly onto the surface. This applicator has special looped material that help a lot with deeper cleaning, while still being gentle enough that they will not damage the surface that is being worked on.

When applying product to the dash with the applicator, work in small sections at a time. Move across the surface in a gentle circular motion, as this gives you the best and most effective clean of the dash, especially if it uses a textured or undulating surface. You want to ensure the product gets into all these areas for the best protection and finish.

Like using the Orange Agent above, it's good to remove the Vinyl Care before it has dried on the surface, which as it dries quick, you'll need to work a bit fast... Use a clean and dry, folded low pile cloth like the Plush Daddy or Dirty Deeds cloth. We find when using this technique that it leaves a perfect finish on the more difficult textured or plain flat surfaces when used this way. It also further helps using this technique if you're using the product by itself, without the pre-clean of Orange Agent, as its more gentle cleaning solution won't dry with any grime back on the dash's surface.